Motogadget Motoscope Pro // 2014-2016 BMW R NineT

$ 754⁹⁰ AUD

Write a review

| Ask a question

Colour: Black

Motogadget Motoscope Pro // 2014-2016 BMW R NineT

Product variants

Description

The Motoscope Pro for BMW R NineT is the only plug & play instrument for the 2014-2016 BMW R9T on the market. The Motoscope Pro is the most recent generation of Motogadget digital dashboard series. Cutting edge technology enables an ultra-slim casing featuring 734 LEDs governed by a 16-bit RISC processor, creating an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary displays are user configurable. Another display section shows the gear currently engaged. The Motoscope Pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph.

Specifications

Features

PACKAGE CONTENTS

Instrument with ca. 55 cm connector cable
Speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable
2 magnets
10 cable end connectors
In-line fuse
2 stainless steel screws
Detailed installation and operating instructions

SPECIFICATIONS & FEATURES

Length/Width/Depth: 109 x 47 x 11mm
Weight w/ cable: approx. 100 g
Mount: 2 x M3 threaded hole
Power consumption, operating: max. 200 mA (load dependent)
Power consumption, standby: 0.4 mA (load dependent)
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Rev counter (LED bargraph): 0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer: 0 – 350 km/h or mph
Trip meter A: up to 999.9 km or mi
Trip meter B: up to 999.9 km or mi
Total mileage (adjustable): up to 250000 km or mi
Operating hours/Service: 0 – 9999.5 h
Clock: 23:59 h/min
Hourmeter: 0 – 99:59:59 h/min/s
RPM count (on LCD): 0 – 20000 rpm
Adjustable RPM warning (gear shift flash): 0 – 20000 rpm
On-board voltage: 9 – 18 V
Low voltage warning: warning if below approx. 11V
Timer 0 - 100 km/h or 0 - 60 mph: 0.00 – 30.59 sec.
Actual accelleration: +/- 0.00 – 1.50 G
Average speed: 0 – 350 km/h or mph
Max. speed: 0 – 350 km/h or mph
Max. RPM: 0 – 20000 rpm
Max. positive acceleration: +1.50 G
Max. negative acceleration: - 1.50 G
Gear display: N, gear 1 - 6
Green control LED (w/ breakoutbox A/B): Neutral (N)
Green control LED (w/ breakoutbox A/B): Indicator left/right
blue control LED (w/ breakoutbox A/B): High beam
Red control LED (w/ breakoutbox A/B): Miscellanious warning functions
Fuel/Reserve (w/ breakoutbox A/B): 0 - 100% w/ low warning
Air temperature* (w/ breakoutbox B): -20 - 80 °C / -4 - 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B): 40 - 120 °C / 104 - 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B): 40 - 150 °C / 104 - 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B): 0 - 8 bar / 0 - 116 psi w/ high/low warning

EXTRA INFORMATION

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.

The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see tab 'Triumph' above).

Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus-systems (Triumph, H-D) additionally. For BMW R9T a Breakout Box is not necessary.

COMPATIBILITY
Compatible with 2014, 2015, 2016 BMW R nineT models.

NOT compatible with BMW R nineT models from 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler.
Material

Aluminium
Certification

Australian Road Compliant, E-Mark Certified

Fitment

2014-2016 BMW R NineT

Shipping & Returns

Whilst we typically ship via Auspost daily from our Northern Beaches warehouse in Sydney, this item is handmade and/or special order which means there is additional manufacturing or freight time required. The total time for delivery can be anywhere from 2-8 weeks and is shown below the cart button. For these products we take an initial deposit, manufacture or order the items, and charge your payment method once it’s ready to leave our warehouse. You can cancel your order at anytime via our self-service portal, subject to cancellation fees. As soon as the final payment is processed, you can expect an Auspost delivery of your goods in 3-5 days. Made to order and special order products are ineligible to be returned.