PACKAGE CONTENTS
Instrument with approx. 75 cm connector cable
Mini push-button
Removable fuse
6 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3
Detailed installation and operating instructions
SPECIFICATIONS
Length/Width/Depth: 59 mm/21.5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded hole
Power consumption, operating: approx. 100 mA (load dependent)
Operating voltage: 7 V - 18 V
Operating temperature: -20°... +80°C
Rev counter (LED bargraph): 0 – 6, 8, 10 krpm
Rev counter (numeric): 0 – 20 krpm
Threshold adjustment/gear shift flash: 0 – 20000 rpm
Speedometer: 0 – 999 km/h or mi/h
Trip meter: 0 – 999.99 km or mi
Total distance (adjustable): 99999 km or mi max.
Travel time display: 0 – 99:59 h/min
DISPLAY & FEATURES
The innovative, ultra bright 251-LED dot matrix shows the engine speed in a scalable horizontal bar graph and all other features as easily readable numeric values. With the push of a button, the engine speed can be displayed as numerical value (rpm) as well.
For optimal readability in dark, sunlight and dawn conditions, the LED luminosity varies automatically.
Specific engine speed thresholds can be programmed for the display to show the maximum permissible engine speed ('red zone') or a gear shift light with all LEDs pulsating simultaneously.
The kicker: The display of the motoscope mini not only displays numeric values from left to right but from top to bottom as well. Thus, the instrument may also be mounted vertically!
OPERATION
You can toggle between the different informations on the LED display by operating the provided menu push-button or e.g. the headlight flasher push-button on the handle bar.
By default, the display shows the speed value. Other values may be displayed via push-button operation if needed. A feature for automatically switching back to the speed value after a predetermined time or leaving the manually chosen value on the display is provided.
Default settings or recorded values are of course stored even with the power supply switched off.
MOUNTING
Due to its compact dimensions, the motoscope mini is easily mounted just about anywhere on any vehicle. Single mount on your triple clamp or right onto the handle bar, embedded into already present instrument panels, into the tank or FBE - this instrument is applicable anywhere.
CONNECTION & SENSORS
Hassle-free wiring and the detailed installation and operating instructions enables even users without any previous experience in handling the vehicle's electrical system to connect this instrument.
The supplied speedometer sensor in stainless steel is very small (M5/25 mm). The 1.5 m connector cable easily connects it to the front or back wheel. This permits easy conversions of originally mechanical speedometer drives.
The motoscope mini is compatible with various original speedometer sensors (reed contact and proximity sensors) used by motorbike manufacturers. In these cases, only the terminals have to be connected while the installation of mechanical sensors will be completely obsolete.
An intelligent 'teaching' function provides for easy speedometer calibration - even in cases of vehicles with sensors at the gear box.
