Kit Includes
1x Motogadget mo.unit Blue
Specs:
L/W/H 90 x 53 x 30 mm, hole spacing 74 mm
Weight about 180g
Fastening 2 x M5 stainless steel screws (mounting and ground connection), 1 x M5 screw contact for battery plus
Operating voltage 6V - 20V
Operating temperature -20°... +80°C
Inputs 1 x input (+12V switched) for ignition lock or mo.lock
11 x control inputs (minus/ground switched)
Functions WITHOUT smartphone and mo.ride app:
Complete digital button control, 4-button or 5-button operation possible
Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off in the event of a fault. After the fault has been rectified, the safety function is automatically reset
Integrated, location-independent alarm system
Integrated, digital, load-independent flasher relay, automatic switch-off optional and adjustable, mo.wave mode selectable
Integrated hazard warning lights
Indicators optionally adjustable as position light
Integrated parking light and headlight flasher
Control of low beam and high beam (up to 200 W switching capacity) with just one button
Integrated, digital brake light modulator, flashing mode programmable
Acceleration-controlled emergency brake light (automatic warning signal)
Integrated starter relay for starters with magnetic switch (up to 30 A switching capacity)
Intelligent and configurable control/disconnection of the consumers in order to be able to use the maximum starting energy of the battery during the starting process
Integrated digital horn relay
Two configurable auxiliary outputs AUX1 and AUX2
Diagnostic function for assignment of input, output, switching status of the circuit, short-circuit diagnosis, etc.
Calibration and current measurement enables defect detection of all lamps
Functions WITH smartphone and mo.ride app:
Encrypted connection via Bluetooth® LE (Low Energy), thus protection against manipulation
Extremely low power consumption of smartphone and mo.unit blue (with active Bluetooth 0.9mA and in power save mode after 6 weeks of inactivity: 0.3mA)
Keyless-Go (ready to start the vehicle by approaching it with your own smartphone)
Highly sensitive acceleration sensor enables your driving activity to be displayed in mo.ride using an activity factor, number of bends, top speed, etc.
Transmission of alarm events (with date, time, vehicle on the ground, etc.) to the app
Setting the mode and sensitivity of the alarm system
Monitoring of the current battery voltage in the app
Diagnosis of all inputs and outputs, measurement of currents, voltage, device temperature
Defect detection of all lamps through calibration. Defective turn signals double the flashing frequency, status message in the app and audio message from Rideassist.
Rideassist: optional turn signal sound and error messages in real time as audio output via helmet headset.
Manual switching of the outputs via smartphone (except starter)
Firmware updates without removal anywhere via smartphone and app
Configuration of the setup menu without expansion at any location via smartphone and app
Vehicle management with automatic information on maintenance tasks, the condition of tires, chains, brake pads, oils, operating materials, spark plugs, etc. by comparing the vehicle mileage using the speedometer signal
Logbook records trips and saves all generated vehicle messages, alarm events and maintenance tasks Display parking position and ping! to help you find a vehicle
LIN bus connection available for later connection of suitable motogadget products
Compatibility IPhone from iOS 10 / Android from 8.0 (compatibility may be limited by the manufacturer) Further information on the app is also available at mo.ride.de or in Google Play and iTunes .
